25-Nav-A6 Advanced Strength of Materials (25-Mec-A6)
Worked solutions to 2 past sittings (2016–2017), 14 questions. Pick a sitting, or start from a topic below.
Questions by sitting
May 2017
- Question 1: Thick-Walled Cylinder – Allowable Internal Pressure
- Question 2: Displacement Field of a Parallelepiped
- Question 3: Factor of Safety of a Stressed Plate
- Question 4: Three Welded Rods Between Rigid Walls
- Question 5: Square Bar under Axial Force and Torque
- Question 6: Three-Element Strain Rosette
- Question 7: Displacement of a Three-Member Truss Joint
- Question 8: Overhanging Beam – Force for a Deflection Limit
May 2016
- Question 1: Cutting Fluids and Machining Chatter
- Question 2: Casting Defects — Solid-Solution Alloys and Hot Tearing
- Question 3: Sheet-Metal Forming — Forming Limit Diagram and Bendability
- Question 4: Thermal Stress in a Restrained Tube-and-Rod Assembly
- Question 5: Continuous Shaft on Three Bearings — Reactions and Bending Moment Diagram
- Question 6: Bolt-Cutter Linkage — Pin Forces and Member Stresses